Palit GeForce RTX 3090 GameRock OC
September 24th, 2020
Type Graphics Card
Swaraz regularly covers some of the biggest AIB GPU manufacturers such as MSI, GALAX, and ZOTAC to name a few. However, there is one brand that we have never covered before in a review – the Taiwan-based Palit Microsystems.
Founded back in 1988, Palit has its factories in mainland China, the main office in Taiwan’s capital (Taipei), as well as branches in Hong Kong and Germany. Palit, which also owns the Gainward brand since 2005, is solely focused on NVIDIA GeForce GPUs and managed to garner a name for itself across Europe because its graphics cards tend to be some of the least expensive compared to other AIB manufacturers while still being reliable.
This review is thus focused strictly on a ‘manufacturer showdown’ featuring Ampere’s flagship, the Palit GeForce RTX 3090 GameRock OC, and Turing’s flagship, the Palit RTX 2080Ti Dual OC; as you probably know already, the GeForce RTX Titan was only ever produced by NVIDIA. Let’s look at the respective specifications, to begin with.
|SPECIFICATIONS||Palit RTX 3090 GameRock OC||Palit RTX 2080Ti Dual OC|
|Graphics Clock||1395 MHz||1350 MHz|
|Boost Clock||1740 MHz||1575 MHz|
|Memory Clock||19.5 Gbps||14 Gbps|
|Memory Bandwidth (GB/sec)||936||616|
|Microsoft DirectX||Microsoft DirectX 12 Ultimate||Microsoft DirectX 12 Ultimate|
|Bus Support||PCI-E 4.0||PCI-E 3.0 x 16|
|HDMI||HDMI 2.1||HDMI 2.0b|
|DisplayPort||DP1.4a x 3||DP1.4a x 3|
|Maximum Digital Resolution||7680×4320||7680×4320|
|Height||2.7 slot||2.5 Slot|
|Board Size||304 x 136 x 60 mm||292 x 112 x 58 mm|
|Graphics Card Power||370W||250 W/ 285W with USB|
|Recommended System Power||850W||650W|
|Supplementary Power Connectors||8-pin X3||8-pin X2|
|Accessory||Manual, Power Cable, ARGB SYNC cable||Manual, Power Cable|
I won’t dwell over the innovations brought by NVIDIA with the Ampere architecture as we’ve been over them time and again on Swaraz. You can read our architectural deep-dive report here.
The aesthetic style chosen by Palit for the RTX 3090, dubbed ‘Dazzling Angel’ by the manufacturer, is very unique thanks to its diamond-like appearance. Beyond that, Palit offers the following features.
Triple-A Die Casting Plate Kit
Two die casting molded “Aluminum Alloy Armor” plates fully cover the circuit board and directly attach to all the hot spots on PCB. They provide:
• Strong-as-armor protection
• Optimized heat dissipation
The fin is molded with embossments to enlarge air contact area for most efficient heat dissipation.
ARGB SYNC allows you to sync the lighting with all your other ARGB- supported PC devices and enjoy the lighting symphony!
The addressable RGB allows gamers to customize each LED color. The crystalline cuts on GameRock cooler bring you the splendid angel lighting. You can personalized the lighting modes with Palit ThunderMaster software.
TurboFan 3.0: 2-Ball Bearing
TurboFan upgrades to 3.0 version with 2-ball bearing to reinforce fan stability. Features:
• IP5X dust resistant technology
• Lower fan vibration
• Prolonged fan life expectancy
Keep Silent while you are experiencing the multimedia application and general workload. The operating fans only occurs while working on heavier loading.
DrMOS, originally only available for high-end server CPUs, is now available in all its glory in the next generation of Palit graphics cards. DrMOS offers high current circuits, low noise operation, and effective reduction of heat generating.
THE ALL NEW THUNDERMASTER
Palit’s new ThunderMaster has had a thorough upgrade. It has more user-friendly interface as well as more personalized settings. ThunderMaster lets you control your overclock settings, fan speeds to LED effects. You can also monitor GPU status with ThunderMaster utility.
Given the nature of this review as a ‘flagship showdown’ among Palit graphics cards, all of the games were tested running at 4K resolution with maximum settings, high-resolution textures, and ray tracing effects where available. After all, both cards were extremely expensive (they still are, even the 2080Ti unless you find a good deal for a used one) when they came out, not to mention perfectly equipped with the hardware to handle everything a modern game can possibly throw at them.
Truth to be told, as far as uncompromised PC gaming goes, I was never fully satisfied with the Palit RTX 2080Ti’s performance after factoring in its high price. Will the Palit RTX 3090 be able to fix that, given NVIDIA’s claim of Ampere as the biggest architectural leap in performance to date? Let’s find out in our mix of game tests.
- MSI MEG Z390 ACE
- Intel Core i9 9900K@5.0GHz
- Corsair Vengeance LPX 16GB DDR4@3.0GHz
- Windows 10 Pro 64-bit
Wolfenstein: Youngblood launched last year. Made by MachineGames in collaboration with Arkane Studios, it runs on the id Tech 6 engine rather than DOOM Eternal’s latest id Tech 7 version. However, unlike DOOM Eternal (at least for the time being), Wolfenstein: Youngblood features Vulkan-based ray traced reflections as well as DLSS 2.0 support, which allows it to run at incredibly high frame rates.
Here, the 3090 provides a healthy 52.2% increase in average FPS, as well as a 46.4% improvement in the one percentile measurement.
Whenever 4A Games releases a new title, it is almost guaranteed to set a new bar for visuals as well as a useful testbed for benchmarking. Metro Exodus, which debuted in March 2019, definitely did not disappoint in that regard and is still one of the most technologically advanced games, even if sadly it hasn’t been updated with the latest DLSS version (2.0).
Compared to Wolfenstein: Youngblood, we registered an even bigger improvement (59.3%) in Metro Exodus when it comes to average FPS going from the Palit GeForce RTX 2080Ti to the Palit GeForce RTX 3090. But the true magic happens with the one percentile, which goes up by 73.2% and lifts the most intensive scenes from below 30FPS to over 45 so that gameplay stays smooth (particularly if you’ve got a G-Sync display) at all times.
Far Cry New Dawn is the latest franchise installment. Running on an updated version of the Dunia engine, Far Cry New Dawn was already quite smooth on the RTX 2080Ti, but the RTX 3090 goes much further, improving the average FPS by 40.6% and the 1% percentile frame rate by 44.5%.
Batman Arkham Knight remains the last game developed by Rocksteady and that will hold true until 2022 when their Suicide Squad title is due for release.
Powered by Unreal Engine 3, it is one of the last big games released with Epic’s older engine. As mentioned above, we cranked everything up to the max, GameWorks and PhysX effects included.
The results are frankly staggering here, with the biggest performance boost we’ve seen to date. Batman Arkham Knight’s benchmark registered an average FPS of almost 150 with the Palit RTX 3090, 98.5% improved compared to the RTX 2080Ti. But even this pales in comparison to what we’ve registered with the 1% percentile, which is 193% higher with the RTX 3090. For some reason, this game sings on Ampere architecture.
Running on the latest version of the Snowdrop engine made by Ubisoft Massive, Tom Clancy’s The Division 2 launched in March 2019. Even though this sequel is technically AMD-optimized on PC (unlike the original game), The Division 2 is surprisingly in the upper end of our Turing-to-Ampere improvement spectrum. Average FPS goes up to 76.7, a 67.1% increase over the RTX 2080Ti, while the 1% percentile frame rate increased by 56.7%.
While over three years old now, Assassin’s Creed Origins (running on the AnvilNext 2.0 engine) remains a stunning game to this date, not to mention the first installment in the franchise to feature proper RPG elements. Here, though, the built-in benchmark provides a performance increase that’s relatively modest by comparison: 43.3% higher average FPS, 43.1% higher 1% percentile frame rate.
Ghost Recon Breakpoint is also built on the AnvilNext 2.0 engine, albeit on a more recent version of it having been released a bit over a year ago. Ubisoft Paris also added Vulkan support earlier this year, which provided improved performance across the board as noted by Keith in his analysis.
Breakpoint running on Vulkan enjoys a greater boost compared to Assassin’s Creed Origins, with 63.5% higher average FPS and 59.9% higher 1% percentile frame rate.
Gearbox’s Borderlands 3 is the only Unreal Engine 4 game tested for this review, which makes it interesting in itself as Unreal Engine 4 is extremely common nowadays.
It’s also another game that’s technically optimized for AMD, but the performance gains on Ampere over Turing are simply great: +77.4% average FPS, +70.6% 1% percentile framerate.
Last but not least, Horizon Zero Dawn is the first big first-party PlayStation 4 exclusive to hit PC in a very long time. It is not, however, the first game running on Guerrilla’s Decima Engine to launch on the platform as Kojima Productions’ Death Stranding beat Horizon Zero Dawn to the punch in this regard.
Horizon Zero Dawn wasn’t exactly the greatest PC port at launch, and unlike Death Stranding does not feature NVIDIA DLSS as it is another game where the developer/publisher partnered with AMD instead. That said, users rocking the Palit RTX 3090 will be able to enjoy much smoother gameplay thanks to 53.6% improved average FPS and 47.8% higher 1% percentile frame rate.
|Game||Avg FPS gain (Ampere)||1% percentile gain (Ampere)|
|Far Cry New Dawn||40.6%||44.5%|
|Batman Arkham Knight||98.5%||193%|
|Tom Clancy’s The Division 2||67.1%||56.7%|
|Assassin’s Creed Origins||43.3%||43.1%|
|Ghost Recon Breakpoint||63.5%||59.9%|
|Horizon Zero Dawn||53.6%||47.8%|
Of course, your mileage may vary depending on which games you regularly play. Still, even without the outlier that is Batman Arkham Knight, the average FPS gain we measured with the Palit RTX 3090 over the Palit RTX 3080Ti is a solid 57%, while the 1% percentile gain is 56%. NVIDIA’s promise of the greatest architectural leap yet holds true.